PDA

View Full Version : Mr Slim remote control not working



aka4ajax
24-12-2007, 05:54 PM
Hi All,

I have a Mr. Slim A/C unit with heat pump.
It operates fine by using the manual buttons SW1 & SW2 to allow heat/cool to 24 degrees Celcius.

But the remote control does not operate at all. It does not even beep when pressed. I have tried the obvious program code changes but still nothing.

Could it simply be the IR control board or is it deeper than that?

chillin out
24-12-2007, 07:16 PM
What about changing the batteries?

Have you tried zapping it against the camera on your moblie phone?

Is the IR sensor correctly positioned?

Chillin:):)

Peter_1
24-12-2007, 10:33 PM
Beeper broken?;)