View Full Version : help with design plate echanger?
jirhol
23-12-2007, 11:46 AM
Is here somebody who can help me with design plate exchanger, only Alfa Laval, I can get this echanger very cheap, refrigerant R410a?
Its for inverter heat pump.
Brian_UK
23-12-2007, 01:15 PM
Have you tried the Alfa Laval website ?
hendry
24-12-2007, 04:29 AM
i'll need more detials on your application.
A/L has specialised people working on each application.
more details would helps us to help you. cheers.
jirhol
29-12-2007, 06:51 PM
website of course,
EXCHANGERS ARE ACH30
Its application with Fujitsu inverter AOY36, so it 10,5KW(100% load)
5,25 kW(50% load)
Im afraid of laminary flow.
Design condensing temperature +37°C or lower, water 35/30°C or + - for the best solution.
It could be ACH30-and 42desks?
Very thanks.
hendry
03-01-2008, 04:50 AM
website of course,
EXCHANGERS ARE ACH30
Its application with Fujitsu inverter AOY36, so it 10,5KW(100% load)
5,25 kW(50% load)
Im afraid of laminary flow.
Design condensing temperature +37°C or lower, water 35/30°C or + - for the best solution.
It could be ACH30-and 42desks?
Very thanks.
sorry, friend.
just return to my desk after long holidays.
piles of responsibility to perform ...
will look into your issue/s in a short while. cheers
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.