help with design plate echanger?

[jirhol]

Is here somebody who can help me with design plate exchanger, only Alfa Laval, I can get this echanger very cheap, refrigerant R410a?
Its for inverter heat pump.

[Brian_UK]

Have you tried the Alfa Laval website ?

[hendry]

i'll need more detials on your application.
A/L has specialised people working on each application.

more details would helps us to help you. cheers.

[jirhol]

website of course,
EXCHANGERS ARE ACH30
Its application with Fujitsu inverter AOY36, so it 10,5KW(100% load)
5,25 kW(50% load)
Im afraid of laminary flow.
Design condensing temperature +37°C or lower, water 35/30°C or + - for the best solution.
It could be ACH30-and 42desks?
Very thanks.

[hendry]

website of course,
EXCHANGERS ARE ACH30
Its application with Fujitsu inverter AOY36, so it 10,5KW(100% load)
5,25 kW(50% load)
Im afraid of laminary flow.
Design condensing temperature +37°C or lower, water 35/30°C or + - for the best solution.
It could be ACH30-and 42desks?
Very thanks.

sorry, friend.
just return to my desk after long holidays.

piles of responsibility to perform ...

will look into your issue/s in a short while. cheers