PDA

View Full Version : FRIGA BOHN evaporator T1F6-4E2



Jose Rocha
14-12-2007, 08:08 PM
Hi all

I need some help about a blast room equipment data.

I have a Copeland compressor with no reference (it was painted), connected to a FRIGA BOHN evaporator nodel T1F6-4E2, series FE3955. We are trying to get the compressor data.

We are reading 90 A per phase on the compressor. We want to know if this is normal or the electrical side has a problem.
Can anyone help us on this matter?

José Rocha

fridge doctor
17-12-2007, 07:29 PM
This is very hard to call not having specific information on the compressor. I tried to get an approximate match by looking up your evap, but it was not listed.

90A per phase indicates by my approximate reckoning typical of a compressor of around 25/30 HP. You don't say if your blast room is chiller or freezer or how big ?