Williams HZ16

[Andy W]

Whilst on site this morning a customer asked me to take a look at a Williams HZ16 stainless steel 1/4oC refrigerator with a blinking light.

On the control pad on front of the cabinet is a symbol like a row of pipes (but no fins) and the small round red light is blinking off/on, I have since found out that it is a condenser clean reminder, how do you reset it to stop it flashing, any ideas.

[Mark]

Andy,

Keep the condenser key pad membrane(under the flasing light) depressed for about 5 seconds or turn off via on/off membrane, then depress condenser clean membrane for around 5 seconds.The condenser clean light is i believe adjustable 1-120 weeks but is factory set at 9 weeks.

With Kind regards
Mark

[Andy W]

I tried every permatation I could think off, the only one I didnt try was holding membrane, switching off still with membrane held down, does this sound right or does some one have a copy of a manual for this?

I have a copy of how to get into the pararmeters and what they are all for but no mention of a condenser clean timer.

[CoolKids]

Hi Andy

Mark is correct I carried this out task just last week and it worked fine.

CK