PDA

View Full Version : Vallient gyser thread #2



The MG Pony
22-11-2007, 11:27 PM
What voltage thermopile does it use, I need a new one for my instent gase water heater but unsure if it uses a 15mV or 30mV couple.

Any help will be realy apreciated one of you guys new the piping for it, I'm still loving you for the help!

Brian_UK
23-11-2007, 12:38 AM
Wouldn't really know MG but assuming that the cost is not great why not buy one of each?

Lowrider
24-11-2007, 12:12 AM
What type was it again? Don't remember anymore, it's been a while back!

The MG Pony
24-11-2007, 04:28 AM
http://www.refrigeration-engineer.com/forums/showthread.php?t=7633

Unit is: MAG 125/7 TZ PB

Lowrider
25-11-2007, 01:21 AM
The manual doesn't say which one either, so my best bet is to get to the local plumber and maybe he can help you!

The MG Pony
26-11-2007, 02:50 AM
Not around here lucky if they even know they exist, all they know is pay day is friday and sh*t flows down hill around most parts here.

Lowrider
26-11-2007, 11:59 PM
I'll try a mate tomorrow and see if he knows, he used to work for Vaillant.

Karl Hofmann
27-11-2007, 12:48 AM
Should be 30 mV

The MG Pony
27-11-2007, 01:48 AM
Awsome thank you guys so much! It is a beuty full little thing but hard as hell to get all the details to properly recondition it and I'm going to keep all the info on a file for any one ells around these parts with the same!