mitsubishi remote start.

[nobby101]

Good after noon ladies and gents.

I have an issue with a mitsi srk408henfr-r2.

It has been fitted into a computer centre but if there is a power cut it wont resume on reconnect.

I have found a mod for the board but the board i have is different to the one in the mod diagram.

the board i have is a rkr 505 a 360.

Does any one know if there is a fix for this board?

much apprieciated and have a nice weekend.
thanks guys.

[Andy AC]

Hello Nobby,
If its hard wired remote, pull the controller apart and check dip switch SW3 inside the controller. Should be in on position for auto restart.

Andy

[nobby101]

Hello Nobby,
If its hard wired remote, pull the controller apart and check dip switch SW3 inside the controller. Should be in on position for auto restart.

Andy
sorry to say its wireless remote only.