PDA

View Full Version : I search of information about Frick



NH3-Coolman
01-11-2007, 03:19 PM
Dear All
I search of information about Frick oil No.9 and No.3
spec. Heat Capactiy and Density
near 50°C and 90°C or 122°F and 194°F
In US or Europa unit of measure.
Thanks!

NH3-Coolman
01-11-2007, 03:33 PM
Dear All

I search of information about Frick Coolware V6.xx or V7.xx
I need this tool only 1 week.
Can I find this tool for free or trial (30 days).

US Iceman
01-11-2007, 04:14 PM
Hi Herr NH3-Coolman,

Frick only allows specific companies to have this software. Anyone who has it, is registered with Frick. The users also have to promise not to release the software to any outside non-registered person/firm.

Sorry, Frick is very protective of the software.

What do you need?

NH3-Coolman
01-11-2007, 05:31 PM
Hi US Iceman
How are you?

I has fear it, this it so is.

You can need certainly introducing yourself for what do I need it. still the same problem (2. Round).

I found few inconsistencies in the data print “from Frick Coolware V6.xx” it we of Frick got, I wanted to check this.
With my calculations comes I on other values, the heat balance is not Ok and more!

I nead a new data print “from Frick Coolware V7.xx for our compressor (guarantee).

BR! NH3-Coolman

US Iceman
01-11-2007, 08:29 PM
Hi :D,

I'm fine and I already thought it was the same problem you have been fighting with. I also saw your post for oil properties and suspected it was for the same project.

I'm trying to get the new password for my copy of version 7.1.1. As soon as I get this I will send you an email.

Best regards,
US Iceman