PDA

View Full Version : REF COM compressor



DEVITG
28-10-2007, 05:16 AM
Hi I need data about a REF COM semi hermetic compressor

REF COM model SRC L085-MO
380 volt. 71 amp.
ref R 22.

It is used at a water chiller I have not the CHILLER Brand .
There are four of each compressor at the chiller.


Thanks in advance

Samarjit Sen
28-10-2007, 09:07 AM
Please visit www.refcomp.it (http://www.refcomp.it) . You will get all the datas and the selection software of RefComp compressor.

DEVITG
29-10-2007, 03:36 AM
Thanks , I can not register , the web page does not work .
Could you send me the software.

devitg@gmail.com

Samarjit Sen
29-10-2007, 04:20 PM
The Software is available on the web site and to enter the download area you have to register and then log in. It is not possible to mail the set up as the same is valid for the computer you have registered and logged in.

Sorry I can not be of help to you. I shall try some other means and see if it can be done.

Samarjit Sen
29-10-2007, 05:13 PM
Please try and see if this link of the setup works or not.

http://download.yousendit.com/33DEBEFE0B5C6900 (http://download.yousendit.com/33DEBEFE0B5C6900)

Kindly let me know if the software could be downloaded

Samarjit Sen
12-04-2008, 03:19 PM
Could you get the details of the RefComp compressor. If not please do let me know, as I have some details with me.

mbadanai
04-06-2010, 02:02 PM
Here's a bit of history and contacts if you need them.

RefComp and Thermokey form together the RTH group which is an independent group which has one owner who is the original founder Mr. Candio.
RefComp makes the very same screw and piston compressors at their factories both near Vicenza in Italy and in Shanghai in China while Thermokey makes many types of heat exchangers for Air Con, Refrigeration , Process Control, Close Control , Power and Energy and Solar Energy markets and manufactures in Italy , China and Brazil.

About 30 years ago Mr. Candio used to own Artec (heat exchangers) which he after sold to Alfa Laval. After RefComp was then founded and was a pioneering company with screw compressor technology specifically designed for HVAC and Refrigeration applications. During this past century Bitzer used to sell the large RefComp screw compressors through their sales network because back then they did not manufacture yet this kind of new screw compressor.
After Thermokey was then founded. Nowdays Thermokey is pioneering in large aluminium microhannel heat exchangers specifically designed for HVAC and Refrigeration applications

you can contact them at :

sales@refcomp.it
sales@thermokey.it